C1 Corvette Battery Tray and Welding Risks on E-coated Parts

Pictured above on the right is Corvette Central’s Made in USA C1 battery tray (part #171301), along with a black coated tray that is a foreign made copy.  The black tray is a good reproduction, as well as an option if your top priority is saving $20.  However, readers should be aware that the black coating, known as “e-coating”, is not recommended by most professionals (including our own e-coater) as a “weld-through primer”.  In short, there are health risks associated with welding fumes.  To avoid this issue, it is recommended that the e-coating be blasted or ground back in the weld areas.  If your intention is to burn off the coating by welding, make sure the resulting fumes are directed away from you in a well-ventilated area. (more…)

Read More

1963-1982 Corvette Alignment Information

By Chris Petris

 

Before an alignment is done, it is important to make sure all suspension components are in good shape. For example, loose wheel bearings on the front or rear will affect alignment and worn components front and rear will alter the alignment over time. Tire wear will indicate how the suspension and tires are handling the adjustments. (more…)

Read More