Posts Categorized C1 (53-62)

Body & Paint

C1 Corvette Windshield Post Problems and Fixes

Many of our 1956 to 1962 Corvette customers report a noticeable vibration or rocking at the base of their windshield.  More frequently than not,  the windshield mounting posts are snapped off.  Over the years, many of these posts have been subjected to questionable repair work, with shims, metal strips and welding being employed to varying… Read more »

C1 (53-62)

Corvette Evolution: From Status Icon to Competent Cruiser

By Chris Petris Society often pokes fun at aging, but there are many positives to growing older that are often glossed over. Many types of wines and cheeses are encouraged to age. As a person grows older, they typically do so with increased wisdom and a better understanding of what is important in life. Fine… Read more »

C1 (53-62)

Corvette Central Deluxe C1 Gas Tank Kit Installation

Written by Jay Heath. Reprinted with permission from Source Interlink, publisher of Vette Magazine. Original article link: http://www.vetteweb.com/tech/vemp_1303_corvette_central_deluxe_gas_tank_kit/ Time may heal all wounds, but it’s hellishly hard on automobiles. These depredations tend to fall into two categories: those arising from the inevitable effects of the aging process, and those inflicted—whether intentionally or not—by one or… Read more »

Body & Paint

C1 Corvette Battery Tray and Welding Risks on E-coated Parts

Pictured above on the right is Corvette Central’s Made in USA C1 battery tray (part #171301), along with a black coated tray that is a foreign made copy.  The black tray is a good reproduction, as well as an option if your top priority is saving $20.  However, readers should be aware that the black… Read more »

C1 (53-62)

Brake Pad Bedding Procedures Explained

  Brake pad bedding defined Brake pad bedding involves heating a brake rotor and pad, through braking, to a specified temperature in order to allow the formation of a transfer layer.  In order to maximize braking performance, brake pads must be bedded-in with their brake rotors.  Following the bed-in procedures provided by the manufacturer will… Read more »