Comments for CC Tech https://tech.corvettecentral.com Corvette Performance, Restoration and Repair Blog from Corvette Central Wed, 16 May 2018 19:57:12 +0000 hourly 1 https://wordpress.org/?v=4.9.6 Comment on 78-82 Seat Belt Replacement by CC Tech https://tech.corvettecentral.com/2015/11/78-82-seat-belt-replacement/#comment-2193 Wed, 16 May 2018 19:57:12 +0000 http://tech.corvettecentral.com/?p=5863#comment-2193 Hi James, You can find all 1981 seat belts and accessories at https://www.corvettecentral.com/search?CurrentSearchCategoryId=C3&q=seat+belt&Years=1981&Catalogs=C3

]]>
Comment on 78-82 Seat Belt Replacement by James Noethtich https://tech.corvettecentral.com/2015/11/78-82-seat-belt-replacement/#comment-2192 Wed, 16 May 2018 16:27:12 +0000 http://tech.corvettecentral.com/?p=5863#comment-2192 I need seat belt driver side 81 Corvette buckskin Carmel

]]>
Comment on C5 Oil Pressure Sending Unit Replacement by CCTech https://tech.corvettecentral.com/2014/11/c5-oil-pressure-sending-unit-replacement/#comment-2191 Mon, 14 May 2018 14:52:17 +0000 http://tech.corvettecentral.com/?p=4962#comment-2191 Unfortunately, this is not a pigtail/connector that we are offering yet. It looks like it may be the AC Delco PT1825, but I don’t have a way to confirm that currently.

]]>
Comment on Six Steps To Protect Your Corvette In Storage by CCTech https://tech.corvettecentral.com/2016/10/six-steps-protect-corvette-storage/#comment-2190 Mon, 14 May 2018 14:37:54 +0000 http://tech.corvettecentral.com/?p=6345#comment-2190 Luckily, modern day radials have less issue with flat spotting than older bias ply tires, but the best prevention tends to be using a “cradle” type flat stopper such as 102953 or 101923.

]]>
Comment on C5 Oil Pressure Sending Unit Replacement by Ernie https://tech.corvettecentral.com/2014/11/c5-oil-pressure-sending-unit-replacement/#comment-2189 Sun, 13 May 2018 18:34:52 +0000 http://tech.corvettecentral.com/?p=4962#comment-2189 Enjoyed and appreciated your guide on the oil pressure sending unit. Unfortunately, after watching numerous YouTube videos attempted to take a short cut in removing the sending unit… I pulled the wires out of the sending unit plug and have now removed the intake manifold to correctly replace the sending unit. Can the plug be purchased separately and then spliced to the little wire I have left to work with?

]]>