Depending on the driving style of the owner, manual transmission clutches can be subjected to a lot of abuse. An owner can wear the disc linings out in just a few days or even within hours. How quickly the clutch pedal is released determines how long the clutch disc will last. Those with a tendency […]
Fuel Injectors Size Selection Guide
For your reference, use the above instructions to calculate fuel injectors size for your Corvette based on target peak horsepower. Instructions courtesy of Precision-Flow. C4, C5, C6 Corvette Factory Fuel Injector Sizes 1982, 1984: 67/68 lb/hr 1985: 24 lb/hr at 43.5 psi or 22.5 lb/hr at the factory 36-37 psi 1986-1993: 22 lb/hr at 43.5 […]
1984-1996 Corvette Cooling Fan Control Modifications
By Chris Petris Illustration by Chris Petris A common question asked among C4 Corvette owners is “why does my engine run so hot? The cooling fans do not come on until the coolant temperature is way too hot”. Federal regulations required high operating temperatures to keep idle emissions at their designated levels. The oxygen sensor […]
Introducing Correct C2 & C3 Motor Mounts from Corvette Central
Corvette Central is pleased to introduce correct motor mounts for C2 and C3 Corvettes, available in both locking and non-locking versions. Until now, quality reproduction motor mounts were impossible to find for C2 and C3 Corvettes. The mounts that are available in parts stores and warehouses do not approach the original factory mounts in terms […]
Corvette Central “no drone” dual outlet mufflers for 1984-1990 Corvettes.
Corvette Central is pleased to introduce our exclusive correct sounding dual outlet mufflers for the 1984-1990 Corvette. These are manufactured and welded in USA by Corvette Central (cases are manufactured in Canada). On the original 1984-1990 dual-outlet muffler, the inner outlet tube is for appearance only, and is blocked off. With our design, the outer […]
New window regulators for C1 and C2 Corvettes
Corvette Central is pleased to introduce manual and power window regulators for 1956-62 and 1963-67 Corvettes. These exclusive regulators are produced to original factory specifications, resulting in fit and function that is identical to the original regulators. Suitable for judging, their movement and range have been engineered with performance verification in mind. The original 1956-62 […]
New Antenna Assemblies for 1969-82 Corvettes
Corvette Central offers antenna assemblies for 1969-1982 Corvettes (not for power antenna applications). The new assemblies reflect some updates that we made to make them more correct in comparison to the OEM antennas.
1953-60 Corvette Grille Assembly
Please read the entire instruction sheet before attempting assembly, as we will not accept returns or warrant bars scratched by improper assembly techniques. First, unwrap all parts and inspect them. Check to make sure you have all the parts listed. If you run into a problem please call product assistance (800-345-4122).
C4 Diagnostic Trouble Codes
Codes, Codes, Codes… Have you noticed “SYS” intermittently showing up in your 1990-1996 Corvette’s speedometer display? This means there is a trouble code stored in one of the on-board control modules. When the 1990 Corvette debuted, GM introduced ECM (Engine Control Module) and CCM (Central Control Module) trouble codes. In addition, ABS/ASR (Anti-lock Brake System/Acceleration […]
1956-1962 Windshield Wiper Transmissions
There’s an old saying: “You never miss the water until the well runs dry.” This is true. In a manner of speaking the windshield wipers on a car are the same. That is, you never think about them until you need them, and if they won’t work, you usually don’t have time for a […]