Corvette Central manufactures many parts for Corvettes, including this cable nut for various control cables found on 58-62 Corvettes. Our three-step, in-house machining process is as follows:
Tag: 1961
Addendum: 1955-1966 Corvette Fuel Pump Rebuild
In a previous article, we covered how to restore your fuel pump. Those were the days! Disassemble the fuel pump, replace the check valves and diaphragm, and you were back in business. I have always felt fortunate that when I started out in this business, engines had carburetors and emission systems were in their infancy. […]
C1 Corvette Windshield Post Problems and Fixes
Many of our 1956 to 1962 Corvette customers report a noticeable vibration or rocking at the base of their windshield. More frequently than not, the windshield mounting posts have snapped off. Over the years, many of these posts may have had questionable repair work, with shims, metal strips, and welding used to varying degrees of […]
1955-1966 Corvette Fuel Pump Rebuild
[ view the Addendum here ] There was a time when a component would fail it would require repair or rebuild. But today we throw it into the appropriate recycle pile. Growing up in the 60s and 70s sometimes makes it difficult to trash anything; today it makes more fiscal sense to buy another one. […]
Warning: Possible Gas Leakage with GF48 Fuel Filters
NOTICE: It has been brought to our attention that there is a possible fuel leakage problem with a small percentage of GF48 fuel filters. These filters are sold by Corvette Central under part # 351290. The problem is caused by very small pin holes (porosity) that go through the part (please refer to area in […]
Corvette Central Deluxe C1 Gas Tank Kit Installation
Written by Jay Heath. Reprinted with permission from Source Interlink, publisher of Vette Magazine. Original article link: https://www.vetteweb.com/tech/vemp_1303_corvette_central_deluxe_gas_tank_kit/ Time may heal all wounds, but it’s hellishly hard on automobiles. These depredations tend to fall into two categories: those arising from the inevitable effects of the aging process, and those inflicted—whether intentionally or not—by one or […]
New from Corvette Central: 1958-61 Corvette Front Fender Side Chrome Moldings
Customers that have purchased new side chrome moldings for their 1958 through 1961 Corvettes over the years are probably well aware of their challenging fit issues. Corvette Central has decided to produce our own versions of the side chrome that meet our quality standards, and we think that you will be pleased with the results. […]
Corvette Central C1 Dash Insert Overview
Ever since they were designed into the 1958 Corvette, passenger side dash inserts have been a somewhat of a headache for Corvette owners. The OEM inserts were subject to damage that the rest of the interior could generally resist. In a short time span, these inserts became dinged, dented or scratched, making the dash of […]
Introducing Correct C1 Push-Down Antennas from Corvette Central
Corvette Central is pleased to introduce correct push-down antennas for C1 Corvettes, available in three versions: 1956-58 (early), 1958 (late)-60 and 1961-62. Our new assemblies not only reflect the attention to detail that judges are looking for during shows, but our dedication to producing the highest quality parts possible. As an example, the antenna tips […]
C1-C3 Corvette Brake Casting Numbers
For your convenience, below are caliper and master cylinder casting numbers for 1953-82 Corvettes. Information courtesy of Lonestar Caliper Co.